ICCNexergy

Leaders in Rechargeable Power Systems

msm07-1-elpac-power-supplies

MSM07 Series

7W Medical Open Frame Power Supply

  • Wide Range AC Input
  • Fully Regulated DC Output
  • Lifetime Expectation >5 years
  • Hold-up Time >22ms at full load
  • Output Floating
  • Safety Approval - EN60601-1 Class II
  • cURus
  • RoHS
  • CE
Print Datasheet
Elpac Part NumberOutput VoltageOutput CurrentPeak Current1Total Regulation2Typical Efficiency3
MSM07055.0V1.4A2.0A±5%74%
MSM071212.0V0.6A0.83A±5%74%
MSM071515.0V0.5A0.66A±5%76%
MSM072424.0V0.3A0.42A±5%75%
MSM072828.0V0.3A0.36A±5%75%
  • Notes
  • 1 Maximum peak load (10W) lasting 500ms with a maximum 10% duty cycle.
  • 2 Includes initial setting, line regulation, load regulation, and thermal drift.
  • 3 Typical at 115VAC and full load.
Input
Input Voltage 85 - 264VAC 100 - 240VAC Nominal
Input Frequency 50 - 60Hz
Input Current <0.3A rms
Inrush Current <37A at 230VAC cold start
Zero Load Power Consumption <0.7W
Earth Leakage Current (Typical)
<32µA @ 132VAC @ 60Hz
<55µA @ 264VAC @ 60Hz
Output
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <750 ms
Hold-Up Time >22ms
Ripple & Noise <1% pk-pk ** *
Over Voltage Protection 110-135%
Over Current Protetion 200 - 350%
Short Circuit Protection shutdown, auto-restart (hiccup mode)
  • Notes
  • * Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
General
Efficiency Avg Efficiency 74.8% @ 115VAC; 75.9% @ 230VAC
MTBF min. 200,000 hours demonstrated
Size 2.00" x 2.28" x 0.71" | 50.80mm x 57.91mm x (18.11mm
Weight 0.10 lbs (0.05 kg)
Power Density 2.2W/in3
Environmental
Operating Temperature 0 – 50°C (Full load to 50°C, derate linearly to 50% load at 70°C)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, non-condensing
Cooling Natural Convection
Vibration All units production tested to 19.6m/s2
EMC & Safety
Emissions FCC Part 15, Class B, CISPR11, EN61000-3-2, -3
Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by UL to the following:
cЯUus
UL 60601-1
CAN/CSA-22.2 No.601.1-M90
CB per IEC60601-1
CE marked to LVD
Input Configuration
Connector Molex p/n 22-43-8030
Mating Connector Molex p/n 50-37-5033 or Equivalent
Mating Connector Contacts Molex p/n 08-70-1040 or Equivalent
Output Configuration
Connector Molex p/n 22-43-8020
Mating Connector Molex p/n 50-37-5023 or Equivalent
Mating Connector Contacts Molex p/n 08-70-1040 or Equivalent
Input Pin Assignments (P1)
Pin 1 AC Line
Pin 2 <not assembled>
Pin 3 AC Neutral
Output Pin Assignments (P2)
Pin 1 +V1
Pin 2 Com

mechanical drawing
ICCNexergy has the capability to modify our standard power supplies to meet custom specifications. With a broad standard power platform, we can quickly deliver a modified power solution in as little as three weeks. Modified options include:
  • Grounded Output
  • Cooling
  • Chassis Mount
  • Cable Harness
  • Load Share

Inventory Results For MSM07

Part Number Distributor Quantity Inv. Date
MSM0705 NEWARK/ELEMENT14 21 6/18/2013
MSM0705 PEI-GENESIS 4 6/18/2013
MSM0705 DIGI-KEY CORPORATION 163 6/15/2013
MSM0712 NEWARK/ELEMENT14 23 6/18/2013
MSM0712 PEI-GENESIS 1 6/18/2013
MSM0712 ALLIED ELECTRONICS, INC. 7 6/17/2013
MSM0712 DIGI-KEY CORPORATION 249 6/15/2013
MSM0712 MOUSER ELECTRONICS 47 6/15/2013
MSM0715 NEWARK/ELEMENT14 3 6/18/2013
MSM0715 PEI-GENESIS 3 6/18/2013
MSM0728 NEWARK/ELEMENT14 3 6/18/2013
MSM0728 PEI-GENESIS 3 6/18/2013